DVS Group
Unsere
Motorspindeln

Camshaft

attendant machines

H 200

product information sheet

Center Drive Machines

[12 sites, 522KB]

contact person

Christian Rhiel

highlights

  • Up to 4 cross slides
  • Turning length up to 1100 mm
  • Work piece diameter up to 100 mm
  • Range of speeds up to 5.000m-¹

product image

machine concept

Series H 200
Machine concept

machine description

The series H 200 stands for the reduction of production time in machining of small work pieces and huge volumes. With max.4 tools in simultaneous machining primary and secondary times can be reduced. With the integrated loading and unloading units the secondary times can be reduced once more so that a reduction of the processing time of 35 % can be realized.

Technical Data

Technical DataH 200-S/OH 200-FH 200-C
workholding devicecollet & chuckroller guide supportcollet
max. work piece diameter [mm]100
100100
max. work piece length [mm]to 1100 mmto 1100 mmto 750 mm
rapid motion speed [m/min]303030
control

Siemens Sinumerik 840D-SL

Siemens Sinumerik 840D-SLSiemens Sinumerik 840D-SL

 

Machine series
H 200 with horizontal machine bed

Drive

C = Centerdrive / F = Facing / O = Opponent Spindle / S = Spindle

Example: H 200-C = Center drive machine with horizontal bed

Additional data

Up to 2 Center drive headstocks
(div. Versions with CM)
Up to 4 NC-Supports
Up to 4 WZ-Revolver (also driven)
Steady Rest
Tailstock
Integrated tool gripper for automation
Part feed/output
chip conveyorr
etc.

 

 

V 300

product information sheet

Center Drive Machines

[12 sites, 522KB]

contact person

Christian Rhiel

highlights

  • Up to 4 cross slides
  • Turning length up to 1.400 mm
  • Work piece diameter up to 240 mm
  • Range speeds up to 5.000-¹

product image

machine concept

Series V 300
Machine concept

machine description

With two center-drive-heads for simultaneous end machining of shafts with a length up to max. 1.600 mm or with chuck construction for 4-axis turning. The product range V 300 is multifunctional and convenience through short loading and unloading times as well as simultaneous machining with two turrets. The V 300 series is particularly suitable with center-drive-heads if only both ends need to be machined and so the complete machining can be carried out in one clamping.

Technical Data

Technical DATA
V 300-S/O
V 300-F
V 300-C
workholding devicecollet & chuckroller guide supportcollet
max. work piece diameter [mm]250 mm200 mm200 mm
max. work piece length [mm]to 1400 mmto 1400 mmto 1400 mm
rapid motion speed [m/min]303030
controlSiemens Sinumerik 840D-SLSiemens Sinumerik 840D-SLSiemens Sinumerik 840D-SL

 

Machine Series

V300 with vertical machine head

Drive

C = Centerdrive / F = Facing / O = Opponent Spindle / S = Spindle

Example: V 300-C= Center drive machine with vertical bed

Additional data

Up to 2 Center Drive Headstocks
(div. Models with CMV)
1 or 2  NC-Supports ont he upper guideways
Up to 2 WZ-Revolver (also driven)
Steady Rest
Tailstock
Different automation systems
Chip conveyor
etc.

 

 

attendant technologies